|
|
|
Wirecutter of last generation with Inverter control, it can be considered as a landmark in its field.
It can be used on all the types of marble, granite and stone, with top performance and life of the diamond wire, at maximum cutting speed.
The whole controls are fully automatic and don’t require the constant presence of the operator.
Technical features:
Diamond wire running system by electric motor 50-60-75-100 Hp with gradual starting and possibility of electronic adjustment and control of diamond wire rim speed from 0 to 40 mt./sec. by inverter.
The electronic system of feed control is extremely accurate and complete, thanking to the combined action of two motors:
· 2 HP motor for the quick positioning of the machine on the rail.
· 0.25 Hp motor with automatic reduction gear for fine regulations.
The feeding on rail is performed on a double central self-cleaning rack with double gear wheel. This system allows the machine to work even in slope position, preventing the risk of sliding.
The Series 1000 is featured by special "electro-hydraulic" system for flywheel positioning. Hydraulic rotation and lateral movement of 30 cm per side with solenoid valve control.
A further lateral movement is possible by electric motor and endless screw. This system allows to perform ground level cuts and two parallel cuts, maximum width cm 250 without moving the machine.
Special feature:
The machine is provided with special blower heating system for flywheel, to reduce icing during winter work and special system to reduce ice deposit on rails. |
|
