*

Drilling equipment

Send to a friend Print page
*
point

Hydraulic Drill

Hydraulic driller on track PCT 100

Hydraulic driller on track PCT 100
The PCT100 machine is suggested for hard materials like granite. It is provided with "Down the Hole Hammer" or Hydraulic hammer and a particular hydraulic device for rotation and advancing. This characteristic allows to obtain top performances not obtainable with traditional systems: exceptional drilling speed (8,6 Meters [ ... ]
Continue

Mod. PP90 - Hydraullic Churn Drill

Mod. PP90 - Hydraullic Churn Drill
The hydraullic churn drill PP90 i s an extremely innovative machine, suggested for vertical and horizontal drillings in any directions on granite and very hard stone . It is fitted for performing continuous cutting with down-the-hole hammer and the lead-holes for diamond wire cutting. The double cylinder guide system allows [ ... ]
Continue
point

Oleodynamic Drill

Electric driller Speed56

Electric driller Speed56
The electric driller mod. SPEED 56 is suggested for marble and stones in order to make lead-holes for diamond wire. SPEED 56 can execute horizontal and vertical holes for one length of beyond 40 meters with a diameter of 56 or 66 mm with extreme precision, thanks to the double chromium plated cylindrical guide. This driller uses [ ... ]
Continue

Mod. P 250 / P 150 - Oleodynamic Drill for Marble and Stone

Mod. P 250 / P 150 - Oleodynamic Drill for Marble and Stone
Rotating drill for marble and stone, specifically designed to make diamond wire lead holes and core borings. Manufactured in a sturdy steel structure, it runs on a chromate, rectified double steel-guide, which allows a perfect holes alignment, avoiding the deviation error, It can perform both vertical and horizontal holes in any [ ... ]
Continue
point

Pneumatic Block Cutter

Mod. DTH180 - Pneumatic churn drill for drilling

Mod. DTH180 - Pneumatic churn drill for drilling
Pneumatic churn drill for vertical and horizontal drilling, fitted for preparing the guide holes for the diamond wire. The DTH180 is fitted for drilling granite, marble, stone. Fully pneumatic, is equipped with rotating head and down-the-hole hammer. Thanking to its features of versatility, it enables to operate in the most [ ... ]
Continue

Hammerblock DH1- Chain pneumatic Block Cutter

Hammerblock DH1- Chain pneumatic Block Cutter
Chain pneumatic block cutter for vertical and horizontal drilling .
Continue

Doubledrill DB2- Chain Pneumatic Block Cutter

Doubledrill DB2- Chain Pneumatic Block Cutter
Chain pneumatic block cutter for continuous vertical drillings , featured by two indipendent columns with 1 or 2 hammers
Continue

Leveldrill - machine for horizontal drilling

Leveldrill - machine for horizontal drilling
Special machine suitable for horizontal drilling.
Continue